The DFI 250 is powered by Sigma-Delta A/D converter, ensuring fast and accurate weight readings. It may be configured via the keypad, through the RS232 port or through IR-Link with our PC software. A function key can be configured to select units of measure (kg, lb, g, & t) hold a weight reading, display an absolute peak weight, count parts or stabilize a moving mass i.e. livestock. To simplify operation, Key Disabling allows any or all keys to be disabled. The DFI 250 can be operated using an AC adaptor or four AA batteries that provide up to 38 hours of continuous operation.
Specifications
Channels
1
Temp. Range Operating
14 to 122 °F
Material
ABS Plastic with Silicon Rubber Keypad
Power Required
AC Adaptor, 12 to 24 Vdcor AA batteries
Peak Hold
Standard
RS232
Standard
Hi/Lo Limits
Standard
Excitation
5 Vdc, Powers 4, 350 ohm Load Cells Vdc
Transducer- Inputs Accepted
.1 mV/V to 3 mV/V
Calibration Method
Front Key Pad or through Computer via Software
Transducer- Bridge Resistance
350 ohms
Accuracy
24 Bit
Analog Output
Non
Amplifier-Filtering
20 Hz with FIR Filtering
Digital- Display
6 Digit, 7 Segments Digits
Digital- Display Update
20 Per Second per second
Digital Display Size
.8″ Inch
Digital Display-Type
LCD
Weight – lbs
.75
Accessory Items1
AC/SOT, Assembly and Calibration of Transducer to Instrumentation ($185.00)
1 Multi-Channel instruments will require an additional calibration fee.
DFI 250 – Digital Weight Indicator
$525.00
Description
The DFI 250 is powered by Sigma-Delta A/D converter, ensuring fast and accurate weight readings. It may be configured via the keypad, through the RS232 port or through IR-Link with our PC software. A function key can be configured to select units of measure (kg, lb, g, & t) hold a weight reading, display an absolute peak weight, count parts or stabilize a moving mass i.e. livestock. To simplify operation, Key Disabling allows any or all keys to be disabled. The DFI 250 can be operated using an AC adaptor or four AA batteries that provide up to 38 hours of continuous operation.
Specifications
Channels
1
Temp. Range Operating
14 to 122 °F
Material
ABS Plastic with Silicon Rubber Keypad
Power Required
AC Adaptor, 12 to 24 Vdcor AA batteries
Peak Hold
Standard
RS232
Standard
Hi/Lo Limits
Standard
Excitation
5 Vdc, Powers 4, 350 ohm Load Cells Vdc
Transducer- Inputs Accepted
.1 mV/V to 3 mV/V
Calibration Method
Front Key Pad or through Computer via Software
Transducer- Bridge Resistance
350 ohms
Accuracy
24 Bit
Analog Output
Non
Amplifier-Filtering
20 Hz with FIR Filtering
Digital- Display
6 Digit, 7 Segments Digits
Digital- Display Update
20 Per Second per second
Digital Display Size
.8″ Inch
Digital Display-Type
LCD
Weight – lbs
.75
Accessory Items1
AC/SOT, Assembly and Calibration of Transducer to Instrumentation ($185.00)
Related products
LFS 210 300 – S Beam Load Cell
$395.00 Add to cartLFS 210 500 – Beam Load Cell
$395.00 Add to cartLFS 242 1 – Tension/Compression Cell
$1,195.00 Add to cart