The model DCM 4800 is an AC or DC powered summing transmitter for up to four load cells with output options of 0-20 mA, 4 to 20 mA or 0-10 Vdc. All input/output options are included on the board so there is no need to specify input/output parameters with the DCM 4800. The DCM 4800 has a built-in excitation supply capable of delivering up to 120 m A at 10 Vdc. The DCM 4800 offers three way isolation, input to output and power, eliminating unwanted ground loop problems. Overall accuracy over the normal room temperature range is excellent at <+0.1 %. Designed with large tare offset requirements in mind, the DCM 4800 can tare off up to 80% of the output of a 3 mv/v load cell at 10 Vdc excitation. If high/low setpoint, alarms/controls are desired, the DCM 4800 board is laid out to accept Opto-22 output relays. Potentiometers are accessible to adjust the high and low trip points.
Summing of up to 4 load cells
5 mv to 50 mv input range
AC or DC power capability
Voltage or current output
Specifications
Channels
1
Temp. Range
-13 to 131 °F
Construction/Material
Board Only
Power Required
11 to 30 Vdc115, 230 Vac
Transducer- Excitation
5 to 10 Vdc
Transducer- Inputs Accepted
5 to 50 mv
Transducer- Calibration Method
Potentiometer
Transducer- Bridge Resistance Min.
350 ohms
Amplifier- Accuracy
Less than 0.1 % F.S.
Analog Amplifier-Output
0-20 mA, 4-20 Ma or 0-10 Vdc
Dim. L
12.5 Inch
Dim. H
4.4 Inch
Dim. W
9 Inch
Weight – lb.
10.5
Note
For Dimensions see PDF full specifications
Accessory Items1
AC/SOT, Assembly and Calibration of Transducer to Instrumentation ($185.00)
1 Multi-Channel instruments will require an additional calibration fee.
DCM 4800-3 – Load Cell Summing Transmitter, No Enclosure
$850.00
Description
The model DCM 4800 is an AC or DC powered summing transmitter for up to four load cells with output options of 0-20 mA, 4 to 20 mA or 0-10 Vdc. All input/output options are included on the board so there is no need to specify input/output parameters with the DCM 4800. The DCM 4800 has a built-in excitation supply capable of delivering up to 120 m A at 10 Vdc. The DCM 4800 offers three way isolation, input to output and power, eliminating unwanted ground loop problems. Overall accuracy over the normal room temperature range is excellent at <+0.1 %. Designed with large tare offset requirements in mind, the DCM 4800 can tare off up to 80% of the output of a 3 mv/v load cell at 10 Vdc excitation. If high/low setpoint, alarms/controls are desired, the DCM 4800 board is laid out to accept Opto-22 output relays. Potentiometers are accessible to adjust the high and low trip points.
Specifications
Channels
1
Temp. Range
-13 to 131 °F
Construction/Material
Board Only
Power Required
11 to 30 Vdc115, 230 Vac
Transducer- Excitation
5 to 10 Vdc
Transducer- Inputs Accepted
5 to 50 mv
Transducer- Calibration Method
Potentiometer
Transducer- Bridge Resistance Min.
350 ohms
Amplifier- Accuracy
Less than 0.1 % F.S.
Analog Amplifier-Output
0-20 mA, 4-20 Ma or 0-10 Vdc
Dim. L
12.5 Inch
Dim. H
4.4 Inch
Dim. W
9 Inch
Weight – lb.
10.5
Note
For Dimensions see PDF full specifications
Accessory Items1
AC/SOT, Assembly and Calibration of Transducer to Instrumentation ($185.00)
DCM4800.pdf
DownloadCF-30-(DCM-4800).pdf
DownloadRelated products
LFS 210 20K – S Beam Load Cell
Call for Price Read moreLFS 230 750 – Universal Beam Load Cell
$585.00 Add to cartLFS 210 40K – S Beam Load Cell
Call for Price Read more